Back to Global Market

User manual

Connection

Connection

Connecting a Vehicle

After the successful login with your registered credential or by social media integration, the main button of the app will allow you to connect a vehicle provided of Bluetooth unit. Just click the main button and follow the instructions.

Pairing process

Pairing process Medley Euro4 before MY2021 (follow instructions below for models from 2021 and above)

- Press and hold the 'mode' button on the handlebar and switch on the vehicle dashboard
- Wait for the 'MIA' icon to flash on the dashboard and immediately release the 'mode' button
- In the Bluetooth settings of your smartphone, search for and pair with the device 'BT ROUTER'.
- If asked enter the code ‘0000’ in order to confirm the pairing

 

Pairing process MP3 HPE 300 Euro5

- Press and hold the 'engine start' button on the handlebar and switch on the vehicle dashboard
- Wait for the 'Smartphone' icon to flash on the dashboard and immediately release the button
- In the Bluetooth settings of your smartphone, search for and pair with the device 'BT ROUTER'.
- If asked enter the code ‘0000’ in order to confirm the pairinig

For using all the functionalities of your connected Piaggio scooter, when the app is connected, please remember to pair at least one headset by entering the ‘Device configuration’ page from app menu page.

If a headset has been previously paired with the smartphone it is strongly recommended to remove it before performing the pairing process.

Pairing process Piaggio1/Medley/BEVERLY/MP3 500-400 Euro5

Press and hold the 'mode' or 'multimedia' (if available) button on the handlebar and switch on the vehicle dashboard (use the center position of multimedia switch on Piaggio 1).

- Wait for the 'MIA' icon to flash on the dashboard and immediately release the button
- From the Bluetooth settings of the smartphone, search for and pair the PMP3 device: XXXX ' (for ANDROID devices the connectivity control unit will be visible twice: select ONLY the one with the headset symbol and NEVER try to pair the other).
- Accept the pairing request and allow the sharing of contacts.
- Open the app, select the model from the vehicle list, push the connection button wait for the connection procedure to be completed successfully.
- If several devices are found nearby, the app will present a list: select the PMP3 device with the same name as the one previously paired.
- Respond affirmatively to all the consents requested by the app; otherwise you will not be able to use the system correctly.

  • Please note that the connection to the app must be completed within the same key-on cycle. If the dashboard is switched off, the procedure must be repeated from the beginning by removing the previously paired devices from the Bluetooth menu of the smartphone.

 

Pairing process MP3 530-400 My 2022

- Enter the 'Settings' page on the the vehicle dashboard, select 'configuration', 'pairing configuration' and then 'pairing request'
- Wait for the 'MIA' icon to flash on the dashboard
- From the Bluetooth settings of the smartphone, search for and pair the PMP3 device: XXXX ' (for ANDROID devices the connectivity control unit will be visible twice: select ONLY the one with the headset symbol and NEVER try to pair the other).
- Accept the pairing request and allow the sharing of contacts.
- Open the app, select the model from the vehicle list, push the connection button and wait for the connection procedure to be completed successfully.
- If several devices are found nearby, the app will present a list: select the PMP3 device with the same name as the one previously paired.
- Respond affirmatively to all the consents requested by the app; otherwise you will not be able to use the system correctly.
- Please note that the connection to the app must be completed within the same key-on cycle. If the dashboard is switched off, the procedure must be repeated from the beginning by removing the previously paired devices from the Bluetooth menu of the smartphone.

 

For the Piaggio1, Medley, Beverly ed Mp3 530-500-400 Euro5 vehicles, it is NOT necessary to pair the headset directly with the vehicle and it is possible to leave it connected to your smartphone.

On iOS devices it is necessary to set the priority of call audio routing on the Bluetooth headset. Otherwise the audio of the calls will not be heard on the headset but will be forwarded to the phone. The option can be found in the menu Settings-> Accessibility -> Touch -> Call audio routing: Select BLUETOOTH HEADSET

However, it is always necessary to connect the app to the vehicle in order to manage calls, notifications and music from the handlebar.

IF THE APP IS NOT DETECTING THE DEVICE ON ANDROID SMARTPHONES, CHECK THAT THE LOCATION SERVICES ARE ACTIVE. THIS CONDITION IS ESSENTIAL FOR SOME VERSIONS OF THE OPERATING SYSTEM.

It is possible the app will not be able to reconnect by itself after inactivity or due to operating system restrictions. In such a case it is enough to put the app in foreground and press the connection button on the main screen

 

Pairing process Beverly EURO4
- Switch on the vehicle dashboard
- In the Bluetooth settings of your smartphone, search for and pair with the device 'BT ROUTER' within 30 seconds from the switch on.
- If asked enter the code ‘0000’ in order to confirm the pairinig
- At the end of pairing process the BT-Router will remain in ‘not connected’ state until the app is started and successfully connected

On Beverly Euro4 ehicle range call and music management functions are not available

Connection issues?

If you are experiencing difficulty pairing your vehicle, please check that:

- Your smartphone has Bluetooth on
- Your vehicle is on and the pairing process has been enabled
- No other Bluetooth device is connected to the smartphone
- If the issues persists you can try to clean the paired devices list by activating the ‘reset pairing’ procedure
- Restarting the smartphone and/or the dashboard may also help in establishing connection

 

Reset pairing procedure Medley

To remove the pairing of all devices from the MIA system it is necessary to:

- Press and hold the 'mode' button on the handlebar and switch on the vehicle dashboard
- Continue to hold the 'mode' button on the handlebar for at least 10 seconds or until the 'MIA' icon remains steady for two seconds after flashing or turns off.
- Switch off the vehicle dashboard

 

Reset pairing procedure MP3 300 HPE

To remove the pairing of all devices from the MIA system it is necessary to:

- Press and hold the 'start engine' button on the handlebar and switch on the vehicle dashboard
- Continue to hold the 'start engine' button on the handlebar for at least 10 seconds or until the 'Smartphone' icon remains steady for two seconds after flashing.
- Switch off the vehicle dashboard

Connecting a headset to your Piaggio MIA system (Not applicable to Medley Euro 5 MY 2021 and above)

After pairing the vehicle, you can connect a headset to it.

Before starting the procedure please delete possible pairing of the headset from the smartphone in order to avoid conflicts while connecting the device.

In order to proceed, select the ‘Device Configuration’ tab into the app menu while connected to the vehicle.

Pairing a headset

Set the device you'd like to connect in pairing mode.
Then select 'configuration' and 'search'.

 

Wait for the device you'd like to pair to appear in the list, then select it.
In the following screen, select the role of the device and pair it.
If you're experiencing difficulties, try repeating the search and pairing procedure.

Multimedia

Multimedia

Multimedia function management Medley MP3 300 HPE

Remote control of multimedia functions

Once the rider headset has been successfully paired and connected to the bike together with your smartphone (as indicated by the dedicated icons on the vehicle dashboard), you will be able to manage phone and audio function directly from the ‘mode’ selector on the right side of the handlebar for Medley vehicle and from the ‘start engine’ button on MP3 HPE 300 vehicle.

The list of functions available is reported in the table below:

 

Music management

Play-Pause music → short press
Next track → long press (with music in play status)
Previous track → double press

 

Voice management

Answer incoming call → short press
Reject incoming call → long press
Recall last missed → long press
Dismiss lost call icon → short press
Activate voice assistant → double press (with music in pause status) NOT AVAILABLE ON MEDLEY EURO 5 MY 2021 AND LATER

WARNING: IF NO HEADSET IS CONNECTED TO THE VEHICLE NO MULTIMEDIA FUNCTION WILL WORK PROPERLY. WHEN A SMARTPHONE IS CONNECTED TO THE ‘PIAGGIO MIA' SYSTEM ALL THE AUDIO STREAM ARE DIRECTED TO IT BY DEFAULT SO IT'S NOT POSSIBLE TO LISTEN AUDIO FROM SMARTPONE SPEAKERS OR HEADSET DIRECTLY CONNECTED TO THE SMARTPHONE UNLESS THE DESTINATION OF AUDIO IS MANUALLY SWITCHED.

 

Multimedia events communicated by ‘smartphone’ icon on MP3 300 HPE Euro5

Incoming call → fast blinking
Active call → slow blinking
Missed Call → slow blinking
Smartphone and Headset connected → icon ON
App connection → double blinking
Smartphone only or headset only connection → blinking each 5 seconds

Functions management at key off

On predisposed vehicles (Medley Euro5 after 2021), it is possible to connect with the app to the vehicle even in key off conditions by enabling the following functions:

 

- Find Me: by pressing the dedicated button, within a distance of 70 meters, blinking of the direction indicators and the acoustic signal is activated.
- Follow Me: by pressing the dedicated button, the headlamp is activated for 10s in order to illuminate the path.
- Seat-opener: the app turns into a convenient remote control to open the saddle without using the ignition key (it is always recommended to check that the compartment is closed correctly before leaving the vehicle and to avoid accidental pressing of the button on the app).

Vehicle management

Vehicle management

Your vehicle has been successfully connected

Now that your Piaggio scooter has been connected, you can access all the vehicle data simply by selecting the main button on the screen.

Remember, if your vehicle is not connected to your smartphone, you can still access the saved data of your last 30 trips and the overall aggregated data from the ‘Statistics’ tab.

 

Connections after pairing

Every time you use your scooter, please remember to connect it to the app in order to save your trip statistics. After the first connection, if the app stays active or opened in background it will reconnect automatically as soon as you start again the dashboard.

 

Vehicle connected

This screen shows all the data and stats related to your vehicle.

Data from Piaggio MIA

For your safety while riding the Interaction with the smartphone touch is disabled by default. Even if strongly discouraged, under your responsibility, you can turn off the screen lock by accessing the menu -> settings -> user preferences.

 

Total Mileage (Not available on Beverly and MP3 300 HPE vehicles)
The total mileage of your vehicle, as recorded by your dashboard even when not using the app. It is synchronized at every connection

 

App Mileage
The total mileage travelled with the App connected to your vehicle

 

Average consumption
The indicator of the average fuel consumption achieved during your trips traveled with the app connected.

 

Activities
It shows the main activities and the most recent notifications from your vehicle. In this section you can display a detailed log of your activities.

Vehicle data

Total travel time
It shows your total travel time specifying the number of hours and minutes that you've spent riding your vehicle while connected to the app.

 

Average speed
The average speed achieved when using the app during the last 30 trips.

 

Average Consumption
This graph shows the average consumption of your last 30 trips

Your stats and activities can be reset using the specific button only when your vehicle is not connected.

The units can be changed from metric to imperial measurement systems from the settings menu of the app.

Maintenance

Next servicing (Not available on Beverly and MP3 300 HPE vehicles)
It shows the number of kilometers left before your next servicing is due. When you approach or overcome the threshold, a notification will appear. Then, you can confirm you have serviced your vehicle to update the countdown to your next service.

 

Battery level
It shows the latest battery voltage registered. When your battery is running low, you'll receive a notification.

Live tracking

Live tracking

This screen shows the data tracked by your Piaggio scooter in real time while traveling. Remember that you can access such data only when your vehicle is connected to the App.

 

Dials

- Instant fuel consumption indicator
- Vehicle acceleration
- Engine torque percentage

 

Secondary indicators of a single ride (reset every time the app gets disconnected)

- Distance
- Average speed
- Average consumption
- Battery voltage
- Trip evaluation
- Coolant temperature

Navigation management

Some models are provided of integrated navigation management able to transfer the turn-by-turn indications from the smartphone app to the vehicle dashboard.

After the first successful connection of the app, the navigation function will be enabled and can be accessed from the dedicated widget in the home page or in the sub-menu opened by pressing the main button (only while connected).

It is possible to use the function when the app is not connected to vehicle but, in order to exploit its full potential, is suggested to have it linked with the vehicle.

If connected, as soon as a destination is selected and the navigation is started from the app, the dashboard will start to receive the navigation info.

For the Mp3 My 2022 vehicle it is possible, once routes have been started or saved, to recall them directly from the vehicle dashboard by scrolling through the various possible destinations with the up and down buttons  of the selector and starting navigation by long pressing the left button.

Similarly, during navigation, it is possible to skip an intermediate destination or interrupt the navigation itself by first using the up and down buttons of the selector to access the desired action and then select it by long pressing the left button.

 

It is needed in any case to open at least once the navigation page every time the app is started for enabling the navigation function on the vehicle.

 

The navigation function is free of charge for three years from the first visualization of the map and the expiration date is reported in the ‘menu’ page.

The renewal of the function will be optional and managed through in-app purchase.

Non-intrusive reminders, instructions and related costs will be sent on the app approaching the expiration date.

At moment the navigation function is subjected to mobile data availability and effective GPS coverage.

Before selecting your destination, you can set your trip preferences and choose and download the language of your voice instructions from the specific navigation setting.

 

In some Countries the visualization of speed cameras position is not allowed by the law (eg. France, Germany, Austria) and, even if present, the indication may still be wrong.

 

The vehicle dashboard supports Latin alphabet only. For such a reason any string related to song titles incoming call id and road names coming in other not supported languages won’t be represented.

If the smartphone language selected by the user is not supported by the dashboard (eg. Greek, Russian, Chinese, Japanese…), the navigation maps and info will be translated in English when an equivalent indication is available.